Specifications:
- Product Name:Smart Multi-functional Control Panel
- Input Power:100-240VAC,50/60Hz
- Working Temperature:0ºC~40ºC
- Working Humidity:5%-90%RH(non-condensing)
- Wireless Protocol:ZigBee
- Dimensions:205.6x85.6x10mm (without the base) 205.6x85.6x52mm (with the base) 60.9x62.9x24.6mm (back base dimension) 60mm (bolt hole spacing).
Installation instructions:
- Turn off the main power in the electricity box and confirm the fire wire is not alive with a test pencil.
- Remove the base of the Smart Switch and install it in the wall box.
- Check the wires and make sure the wires are in good contact with the terminals and no exposed cooper wires.
- Fasten the base to the wall box with mounting screws and fix the Smart Switch back to the base.
-Note that the screws should not be fixed too tight during installation in case any deformation or damage to the screen and hardware.
- If the Smart Switch is not flat after installation, do not press the screen violently, please check the wall box and the base installation at first.