Smart Home 3 Gang WiFi Smartphone Control Grass Touch Switch

• Customization: Available
• Type: Infrared Sensor Switch
• Principle: Infrared
• Model NO.: u110
• Wires: 4-Way
• Standard: Standard
• Application: Toilets
• Size: 4-Way
• Transport Package: Simple
• Specification: 86*86*36mm
• Trademark: iPuray
• Origin: Guangdong, China
• Package Size: 18.00cm * 15.00cm * 5.00cm
• Package Gross Weight: 0.250kg

Product Description

Features:

u110 is a WiFi Timer Switch which controls power ON/OFF of 3 loads. It can be activated either by the button on its front or by a Smartphone. It is widely used for conference room, office, home living room, etc.

• Operates on L&N Input, and fits in a standard wall box;
• High quality glass as faceplate, luxury and elegant;
• Good for AC motors and all types of lights;
• Easy to use. A gentle touch will turn on or turn off the load;
• WiFi link to the smart phone with a working distance as long as 30m;
• Can be used as night light. The button is always lit by blue backlight, so it is easy to find even in the dark;
• ABS-V0 flame resistance material;
• Classical 86 series design and easy installation.

Fig. 1 and Fig. 2 show the front view and the back view of the u110 glass touch screen switches respectively. 

There are four on/off buttons and one Off button on the front, and there are wiring terminal blocks on the back. The buttons are backlit with blue light.

 

 

Specification Parameters:

 

Input Voltage	180~250V(50Hz/60Hz)	Operation Environment	No-condensation 20-90% RH, -20ºC~40ºC
Wattage	Resistive:  1000W/Load Inductive:  500W/Load Capacitive:  200W/Load	Load type	All Types
Mounting Hole Spacing	60mm	Matching Box	75mm x 75mm x 50mm
Dimension	86mm x 86mm x 36mm	Weight	140g

 

 

Wiring Diagram and Installation Guide:

u110 WiFi timer switch requires both hot wire and neutral wire for installation:

     Hot wire (ACL):           Coming from the power line with 220V;

     Neutral wire (ACN):   Usually coming with the hot wire; 

     Load wire:                   Going to the loads.

Warning: Please make sure power is turned off before starting installation!

 

Fig. 3 shows the wiring diagram and Fig. 4 shows the step-by-step installation instructions. There are three easy steps:

    Step one:      Use a screwdriver to pry off the front plate in position A;

    Step two:      Wiring according to the diagram and the labelled ports of the switch; 

    Step three:   Install the switch to the wall box using screws and put back the front plate.

Applications:

Once connected to an u110 WiFi Timer Switch, home appliance or other electronic equipments are not only controllable by a Smartphone, but also can have their operation status displayed by a Smartphone. Fig. 5 shows typical applications of u110 WiFi Timer Switch.